Call Selector PSTN & GSM Line ( TCS-1801)

Description: Call selector is a device used in the situation that there are two outgoing lines but only one telephone set. It can reroute some calls to go through one line, and the other calls to go through the other line automatically. People have a PSTN line in use, and they might want to install another VoIP line or GSM/ CDMA FWT line as usually the rate of other line is much lower. It can help people choose the most economic call router and save call cost. 1. It would take too much space of the desk if adopts 2 telephone sets for the 2 outgoing lines. We can solve the problem by installing a call selector with one single telephone set, and it is convenient to use. 2. People have installed a new lower rate telephone line, but the former line should still be used for incoming calls. 3. Select suitable call router to save call cost, such as call to PSTN through PSTN and call to GSM through GSM network, as the call rate for PSTN to PSTN and GSM to GSM is lower than PSTN to GSM or GSM to PSTN. 4. The company has installed some new lower rate telephone lines, but there are not enough outgoing ports with the PBX. It is more economical to install some call selectors than change a new PBX. º Call select automatically Users can use one telephone set with two different outgoing lines, and the call would select the line according to the programming automatically. º Simulated Off Hook state available Users can set simulated Off Hook state for the other line when one line is on talking. So incoming caller can hear busy prompt and no incoming call would be missed. º Compatible: It can be used for the select between PSTN line and VoIP line, PSTN line and GSM/ CDMA FWT, GSM/ CDMA FWT and VoIP line, and so on. º Easy Programming: Call selector can be programmed manually using the keypad of telephone set. º Call prefix programmable: Users can program which phone numbers go through one line and which numbers go through the other line. º No influence on the voice quality: It does not have any influence on the voice quality. º Busy line prompts available: If there is incoming call from one line when the other line is on talking, users can set the line busy tone. º Basic auto dialer function: It can add some gateway number for the two lines before the phone number to save call cost. º Intercept/ Delete function: It can intercept/ delete some digits that users dial. º PBX interface It is compatible with PBX, and users can set outgoing code for the two lines. º System password: Call selector can be set 4-digit system password for data lock. º Multi-line power adaptor and stackable design makes it can work as low cost multi-line call selector.( optional)